Flashforge Finder User Manual page 65

②Turn on the Finder. Make sure the build plate has been leveled and the filament is
loaded.
[Print] and then tap the SD Card icon in the middle. The file(s) will display on
③Tap
the screen., Select the file you want to print and tap [Print]. The file will be
transferred the printer.
⑥And the printer will heat up the nozzle automatically and start to print after the
nozzle reaches the aimed temperature.,
Abort： To stop heating and printing. Once you tap [Abort], the process is irreversible.
Pause：To suspend the print job, you can tap it again to resume it. It's usually used
when you want to change the filament halfway.
65
Finder User Guide | www.ff3dp.com