Understanding Messages Requesting Toner Container Replacement - Kyocera Mita FS-C5016N Operation Manual

5.1.2

Understanding Messages Requesting Toner Container Replacement

The printer displays messages for individual colors at two stages of toner usage. This
message is automatically alternated with the other printer message (such as Ready):
• When the printer becomes low on toner, for example in the cyan container, the printer
displays the message Toner low C, M, Y, K as the first caution. Note the replacement
is not always necessary at this stage.
• If you ignore the above message and continue printing, the printer displays the message
Replace Toner — just before the toner is used up. The toner container must be
replaced immediately. Clean the separate charger wires, etc. After the cleaning is
finished, however, the message does not automatically change to Ready. To restart
printing, you must press the
In either case, to replace the toner container, see
on page 5-2.
key and make the printer ready.
GO
section 5.1 Toner Container Replacement
5-3
5.1 Toner Container Replacement