Kyocera Mita FS-C5016N Operation Manual page 186

5.3 Cleaning the Printer
3
Push the lens cleaner knob back in completely. After cleaning, make sure you restore
the lens cleaner knob to its home position.
Figure 5-30
.
If the lens cleaner knob is not restored to its home position, the
corresponding color will be printed over the whole page.
Note
Use the same procedure to clean the lenses on the main charger unit of the other
toner containers.
4
Once you are finished cleaning all 4 lenses, close the left cover.
Figure 5-31
5-18