Kyocera Mita FS-C5016N Operation Manual page 97

3.6 Making Default Settings
Printing Lists of Fonts
To help you decide in selecting a font, you can printout lists of the internal fonts or the
optional fonts including downloaded fonts. Samples for font lists are shown in
on page 3-51.
1
Press the MENU key.
2
Press the or
Font
3
Press the key.
4
Press the or
of Option Fonts appears.
>List of
Internal Fonts
5
Press the ENTER key. A question mark (?) appears.
>List of
Internal Fonts?
6
Press the ENTER key again. Processing appears, then Ready. The printer prints
out a list of fonts with a sample and font ID (number) for each of them. Sample lists
of fonts are shown in
key repeatedly until Font > appears.
>
key repeatedly until >List of Internal Fonts or >List
Figure 3-8 on the next page.
3-50
Figure 3-8