Kyocera Mita FS-C5016N Operation Manual page 79

3.4 e-MPS
Maximum Space Assigned to Permanent Code Jobs
This changes the hard disk space that holds permanent code jobs. You can change the
maximum space from 0 to 9999 (megabytes). The actual maximum size depends on the size
of free hard disk space, however. The default size is 1/6 of the total hard disk space, rounded
off in unit of 50 MB. For example, if the total hard disk space is 10 GB, the default size is
1550 MB.
1
Press the MENU key.
2
Press the or
e-MPS
3
Press the key.
4
Press the or
>e-MPS
Configuration
5
Press the key.
6
Press the or
>>Perm. Code JOB
Size
7
Press the ENTER key, the message display shows a blinking cursor (_).
>>Perm. Code JOB
Size
8
Press the or
cursor. Use the
9
When the desired size is displayed, press the ENTER key.
10
Press the MENU key and the display returns to Ready.
key and select e-MPS >.
>
key and select >e-MPS Configuration >.
>
key and select >>Perm. Code JOB Size.
1550MB
1550MB
key to increase or decrease, respectively, the value at the blinking
and keys to move the cursor right and left.
3-32