Expanding Memory - Kyocera Mita DP-2800 PLUS Instruction Handbook Manual

Expanding Memory

Memory Required by the Printer Environment
The printer comes standard equipped with 8 MB of main memory. However, more complex pages can
be printed and processing speed increased by expanding the printer's memory. There are two slots
available in the printer for expanding memory. Printer memory can be expanded to up to 72 MB by
installing optional extended memory chips (SIMMs) in these slots.
Note ______________________________________________________________________
The expansion memory should be installed only by an authorized dealer or a certified technician. We
shall not be liable for damage due to improper installation of the expansion memory.
It may be necessary to extend memory depending on the operating environment of the printer. Please
refer to the table below for minimum memory requirements in various environments.
Printing Environment
HP LJ 5M/5Si (factory setting)
HP LJ 5M/5Si, duplex mode = on*
HP LJ 5M/5Si, duplex mode = off
Resource protection
HP LJ 5M/5Si, duplex mode =
Resource protection
KPDL, duplex mode = off
KPDL, duplex mode = on
*An optional duplex unit (AD-31) is required for duplex printing.
Note ______________________________________________________________________
When printing on paper larger than A4 size, it may be necessary to extend memory depending on the
size of data to be printed.
Minimum Memory Required
Resolution: 300 dpi Resolution: 600 dpi
8 MB
8 MB
—
—
8 MB
8 MB
Expanding Memory
8 MB
8 MB
10 MB
14 MB
8 MB
12 MB
1- 41