Code Set - Kyocera Mita FS-C5016N Operation Manual

Setting the Code Set
You can change the character code set. Available character code sets vary depending on the
current font. (The default is IBM PC-8.)
1
Press the MENU key.
2
Press the or
Font
3
Press the key.
4
Press the or
>Code Set
IBM PC-8
5
Press the ENTER key. A blinking question mark (?) appears.
>Code Set
?IBM PC-8
6
Press the or
7
Press the ENTER key.
8
Press the MENU key. The display returns to Ready.
key repeatedly until Font > appears.
>
key repeatedly until >Code Set appears.
key until the desired character code set appears.
3-49
3.6 Making Default Settings