Special Paper; Selecting The Special Paper - Kyocera Mita FS-C5016N Operation Manual

2.4 Special Paper

2.4 Special Paper
2.4.1

Selecting the Special Paper

Besides plain paper, this printer can use the following types of special paper:
Paper type to be used
Thin paper (60 to 64 g/m²)
Thick paper (90 to 200 g/m²)
Colored paper
Recycled paper
Overhead projector transparencies Transparency
Postcards
Envelopes
Label
Table 2-5
You can assign one of these special paper type to a paper cassette or MP (multi-purpose)
tray by using the printer's operator panel keys. Then, the printer can automatically select the
paper cassette or multi-purpose tray to feed the special paper from and internally adjust the
electrical parameters for optimum printing performance according to the special paper type.
For details, see Chapter 3 Using the Operator Panel, section 3.10.5 Setting the Cassette
Paper Type on page 3-76.
Note that some types of special paper do not allow feeding from the paper feeder cassette.
Since special paper differs significantly in paper composition and quality, special paper is
more likely to cause problems than white bond paper during printing. When using special
paper, be sure that they are manufactured for photocopiers and/or page printers.
Before purchasing any special paper, make a test print using the printer and check whether
the results are satisfactory.
Kyocera Mita shall not be liable for any danger to a person or machine that
is caused by using special paper (e.g., fumes emitted from the special
paper).
Note
To avoid problems, stack transparencies, labels, postcards, envelopes, or thick paper on the
face-up tray (option).
Major considerations for each type of special paper are given below.
Paper type to be selected
Vellum
Thick
Color
Recycle
Cardstock
Envelope
Labels
2-16