Setting The Cassette Paper Size - Kyocera Mita FS-C5016N Operation Manual

3.10 Paper Handling

3.10.4 Setting the Cassette Paper Size

To set the standard sizes A5, A4, B5, Letter, and Legal size for the paper cassette, use the
following procedure to set the paper size dial of the paper cassette.
If you use a non-standard size, see
Properly set the paper into the paper cassette. For details about the adjustment of the paper
guides and paper stopper inside the paper cassette, see
2.3 Loading Paper on page
1
Turn the paper size dial so that the size of the paper you are going to use appears in
the paper size window.
Paper Size Dial
Figure 3-13
2
Adjust the paper guides and paper stopper inside the paper cassette to the size of the
paper to be used and load the paper into the cassette.
The paper size setting for the paper cassette is completed.
Custom Paper Size
In addition to the standard sizes A5, A4, B5, Letter, and Legal size for the paper cassette,
paper of other sizes can be fed. When placing paper of sizes other than A5, A4, B5, Letter,
or Legal into the paper cassette, set the size of the paper to be used into the printer by
following the procedure given below. If an optional paper feeder (PF-60) is installed,
custom sizes for its paper cassette can be set using the same procedure.
This menu appears when the paper size dial of the paper cassette is set to OTHER.
Properly set the paper into the paper cassette. For details about the adjustment of the paper
guides and paper stopper inside the paper cassette, see
2.3 Loading Paper on page
Custom Paper Size.
2-8.
2-8.
3-72
Chapter 2 Handling Paper, section
Paper Size Window
Chapter 2 Handling Paper, section