Jam At The Rear Cover - Kyocera Mita FS-C5016N Operation Manual

4.4 Clearing Paper Jams
4.4.5

Jam at the Rear Cover

1
While pulling the green paper transfer unit release lever, pull out the paper transfer
unit.
Figure 4-5
2
Open the rear cover and then the fuser cover, and remove the jammed paper.
If the optional face-up tray is installed on the printer, remove that tray
first before attempting to remove the jammed paper.
Note
Figure 4-6
The fuser unit inside the printer is hot. Do not touch it with your hands
as it may result in burn injury. Remove jammed paper carefully.
Caution
3
Push the paper transfer unit back in and close the fuser cover and rear cover.
Rear Cover
4-16
Paper Transfer Unit
Release Lever
Paper Transfer Unit
Fuser
Cover