Usb Interface; Specifications; Interface Signals; B.2 Usb Interface - Kyocera Mita FS-C5016N Operation Manual

B.2

USB Interface

B.2.1

Specifications

B.2.2

Interface Signals

This printer supports the Full-Speed USB 2.0. USB (Universal Serial Bus) interface
specifications and interface signals are as follows.
Basic specification
Complies with the Full-Speed USB 2.0.
Connectors
Printer: B-type receptacle (female) with upstream port
Cable: B-type plug (male)
Cable
Use a shielded cable that complies with USB 2.0 and not longer than 5 meters (16 feet).
Transfer Mode
Full speed (max. 12 Mbps)
Power Control
Self-power device
USB Connector Pin Assignment
Pin Signal
1 Vbus
2 D-
3 D+
4 GND
Shell
Table B-3
Description
Power supply (+5 V)
Data transmission
Data transmission
Signal ground
Shield
B-5

B.2 USB Interface