Studer SW V4.0 OnAir 1000 Operating And Service Instructions page 48

OnAir 1000 Digital Mixing Console
Access Permission:
4-6 Channel Functions
Depending on the access permission (see
logged in, the functions not available to this user will not be displayed on
the Channel Control page; an example is given below. This user cannot ac-
cess the following parameters:
• PHASE
• AUX 1
Output summing buses (ΣPROGRAM, ΣRECORD)
•
• PAN/BAL.
If the user has no access permission at all, the Channel Control page will
not be displayed.
SW V 4.0
chapter 10) of the user currently
Date printed: 23.10.03