Studer SW V4.0 OnAir 1000 Operating And Service Instructions page 16

OnAir 1000 Digital Mixing Console
2.2 PFL Signaling
3 MONITOR EXPANDER Page, Talkback Functions
2 New Features
When a PFL key is activated, pin 11 of the STUDIO MON CTRL connec-
tor is activated (i.e. pulled to ground). This pin was formerly labeled as
"Spare OUT 2".
STUDIO MON CTRL (D-type, 25 pin, male):
13
Pin Signal
25
12
1 +5 V SUPPLY
24
11
23
2 COMMON
10
22
9 3 Switch AUX1
21
8
4 Switch OFF AIR
20
7
19
5 Switch EXTERN
6
18
6 Switch TB TO TEL1
5
17
4
7 n.c.
16
3
8 Lamp AUX1
15
2
14
9 Lamp OFF AIR
1
The MONITOR EXPANDER page, possibly known from your experience
with OnAir 2000M2 consoles, can now be opened on the OnAir 1000 con-
soles as well. For this purpose, the SYSTEM CONFIG. Page has an addi-
tional "MONITOR EXPANDER" button, as shown below:
When touching this button, the MONITOR EXPANDER page opens and
allows to assign three different functions to any of the F1...F5 buttons:
TB FROM CR TO ALL AUX, TO ALL N–1, or TO ALL (meaning all
AUX and all N–1), or NONE (no function at all).
SW V 4.02/V4.03
Pin Signal
10 Lamp EXTERN
11 Lamp PFL SIGN.
12 n.c.
13 GND
14 +5 V SUPPLY
15 Switch PGM
16 Switch AUX2
17 Switch PFL
18 Switch TB TO CR
Pin Signal
19 Switch TB TO TEL2
20 Lamp PGM
21 Lamp AUX2
22 Lamp PFL
23 Lamp TB TO STUDIO
24 Lamp STUDIO MIC
ON
25 GND
Date printed: 12.07.04