Studer SW V4.0 OnAir 1000 Operating And Service Instructions page 121

Date printed: 23.10.03
Diagnostics and Error Handling – System Configuration Detection
Error ID Type Indication
000 Information no
001 Information yes
002 Warning yes
003 Information no
004 Information no
005 Error yes
006 Information no
007 Information yes
008 Warning yes
009 Information yes
010 Information yes
011 Information yes
012 Information yes
013 Information yes
014 Information no
015 Information yes
016 Warning yes
017 Information yes
018 Information yes
019 Information no
020 Information yes
021 Error yes
022 Information no
023 Information yes
024 Warning yes
025 Information no
026 Information yes
027 Warning yes
028 Information no
029 Information yes
030 Warning yes
031 Information no
032 Information yes
033 Warning yes
034 Information no
035 Information yes
036 Warning yes
038 Information yes
039 Warning yes
043 Information no
044 Warning yes
045 Information no
046 Warning yes
047 Information no
048 Warning yes
049 Information yes
050 Information yes
156 Information yes
157 Information yes
158 Information yes
159 Information yes
Diagnostics and Error Handling – Hardware Performance
Error ID Type Indication
051 Warning yes
052 Warning yes
053 Warning yes
SW V 4.0
OnAir 1000 Digital Mixing Console
Diag. Box Error Text (Conflict)
no Module for Channels [n] - [m] installed!
no Module for Channels [n] - [m] added!
no Module for Channels [n] - [m] removed!
no Central Module installed!
no Central Module added!
yes No communication to Central Module!
no Input Module for Channel [n] installed!
no Input Module for Channel [n] added!
no Input Module for Channel [n] removed!
no Channel [n] Input Type changed to Mic Input!
no Channel [n] Input Type changed to Analog Line Input!
no Channel [n] Input Type changed to Digital Line Input!
no Channel [n] Input Selector changed to A/B!
no Channel [n] Input Selector changed to 1/2/3/4/5/6!
no Digital Output Module for [output] installed!
no Digital Output Module for [output] added!
no Digital Output Module for [output] removed!
no Insert [n/m] Input Type changed to Analog Line Input!
no Insert [n/m] Input Type changed to Digital Line Input!
no Monitoring Module installed!
no Monitoring Module added!
yes No communication to Monitoring Module!
no Time Sync Module installed!
no Time Sync Module added!
no Time Sync Module removed!
no Insert [n/m] Module installed!
no Insert [n/m] Module added!
no Insert [n/m] Module removed!
no Sync Module installed!
no Sync Module added!
no Sync Module removed - Now Running on 48 kHz internal
Clock Reference!
no Telephone Hybrid Control Module installed!
no Telephone Hybrid Control Module added!
no Telephone Hybrid Control Module removed!
no Channel DSP for Channel [m/n] installed!
no Channel DSP for Channel [m/n] added!
yes No communication to Channel DSP for Channel [m/n]!
no Number of Channels increased to [n]!
no Number of Channels decreased to [n]!
no Sum DSP installed!
yes No communication to Sum DSP!
no Insert DSP installed!
yes No communication to Insert DSP!
no Aux DSP installed!
yes No communication to Aux DSP!
no Channel Front Board type is OnAir 1000!
no Channel Front Board type is OnAir 1000!
no
Number of Faders increased to [n]! (n in hexadecimal)
no Number of Faders decreased to [n]! (n in hexadecimal)
no Channel Routing reset to 1:1 mapping, since the number of
Channels has been changed!
no Channel Routing reset to 1:1 mapping, since the number of
Faders has been changed!
Diag. Box Error Text (Conflict)
yes Watch RTC Failure!
- RTC Device Missing
- Device Faulty
- Battery Low
no Missing External Clock - Now Running on 48 kHz internal
Clock Reference!
no Missing External Video Clock
Diagnostics 13-3