Studer SW V4.0 OnAir 1000 Operating And Service Instructions page 114

OnAir 1000 Digital Mixing Console
Code 0x00000200
Code 0x00000400
Customer Code Combinations:
Customer Code Setting:
11-14 Configuration
Automatic Channel Routing
When activated, the user's own channel routing is automatically activated
during log-in. Otherwise, the channel routing has to be manually loaded
after having logged-in.
Higher Attenuation of Sum Signal During Talkback
Allows to attenuate the "N" content of the N–1 signal by a further 10 dB,
improving the intelligibility of the TB voice.
If more than one of the Customer Code functions are desired, the corre-
sponding codes can be accumulated by just adding the code numbers.
Please note that the customer codes are displayed and entered in hexa-
decimal.
For activating both the 0x00000004 and 0x00000008 codes, enter a cus-
tomer code sum of 0x0000000C.
After touching CUSTOMER CODE on the SYSTEM CONFIG. page, the
keyboard page appears where the new code can be entered.
After confirmation with ENTER, the following dialog box appears. Now,
you can either re-boot the system (REBOOT) which is necessary for the
new code to become active, or continue (CONT.), then the code modi-
fication becomes active at the next power up of the console:
SW V 4.0 Date printed: 23.10.03