Studer SW V4.0 OnAir 1000 Operating And Service Instructions page 194

OnAir 1000 Digital Mixing Console
PCB Locations 15...17:
Analog Output Units:
RA1
OUTPUT LEVEL
A RIGHT
P14
P27
P28
P41
P54
RA2
OUTPUT LEVEL
A LEFT
4-8 Service
17 16 15
Temporary jumper setting to PGM and RECORD – see jumper positions
marked in black:
P2
P15
P29
P42
Notes: The two other default factory jumper positions (marked in gray) are valid
for the AUX1/2 outputs (PCB in location 16) and for the N–1 A/B outputs
(PCB in location 17).
Once finished, don't forget to set the jumpers back to their original posi-
tions and to re-establish the console settings as they were before the
alignment procedure.
SW V4.0
P13 A
P26
B
P40
P53
RA3
OUTPUT LEVEL
B RIGHT
B STEREO
Date printed: 27.10.03
RA4
OUTPUT LEVEL
B LEFT
B MONO