Studer SW V4.0 OnAir 1000 Operating And Service Instructions page 123

Date printed: 23.10.03
104 Information yes
105 Information yes
106 Information yes
107 Information yes
108 Information yes
109 Information yes
110 Information yes
Error ID Type Indication
113 Information yes
114 Information yes
115 Information yes
116 Information yes
117 Information yes
118 Information yes
119 Information yes
120 Information yes
121 Information yes
122 Information yes
123 Information yes
124 Information yes
127 Information yes
128 Information yes
129 Information yes
130 Information yes
131 Information yes
132 Information yes
133 Information yes
134 Information yes
136 Information yes
137 Information yes
138 Information yes
Error ID Type Indication
144 Error yes
145 Error yes
146 Error yes
147 Error yes
148 Error yes
149 Error yes
Error ID Type Indication
176 Information yes
Error ID Type Indication
192 Warning yes
193 Information yes
SW V 4.0
OnAir 1000 Digital Mixing Console
Snapshot Controller (cont.)
yes Mic Setting not recalled due to corrupted Mic Setting Data!
yes Snapshot not loaded because user [%s] (owner of the
Snapshot) is not defined on this mixing console!
yes Mic Setting not loaded because user [%s] (owner of the Mic
Setting) is not defined on this mixing console!
yes All Private Mic Settings used.- Only [n] of [m] Private Mic
Settings loaded!
yes Recall not possible as selected Snapshot is not defined!
yes Recall not possible as selected Mic Setting is not defined!
yes Snapshot recall failure - channel [n] not available for insert
assignment! Insert [m] not recalled.
PC-Card Controller
Diag. Box Error Text (Conflict)
yes PC-Card Slot [%] - Empty!
yes PC-Card Slot [%] - Card not supported!
yes PC-Card Slot [%] - Card not formatted!
yes PC-Card Slot [%] - File not found!
yes PC-Card Slot [%] - Card already formatted!
yes PC-Card Slot [%] - Card write protected!
yes PC-Card Slot [%] - Please wait, formatting in progress!
yes PC-Card Slot [%] - Card formatted!
yes PC-Card Slot [%] - Card write error, IFX errorcode = [n]
yes PC-Card Slot [%] - Card read error, IFX errorcode = [n]
yes PC-Card Slot [%] - Volume not mounted, no IFX workspace.
yes PC-Card Slot [%] - Volume not mounted, bad BIOS Pa-
rameter Block.
yes PC-Card Slot [%] - File Empty!
yes PC-Card Slot [%] - Snapshot Block Checksum Failure! [n] of
[m] Snapshots loaded.
yes PC-Card Slot [%] - Mic Setting Block Checksum Failure! [n]
of [m] Mic Settings loaded.
yes PC-Card Slot [%] - Configuration Checksum Failure! Con-
figuration not loaded.
yes PC-Card Slot [%] - Snapshot Block Software Version
mismatch!
yes PC-Card Slot [%] - Mic Setting Block Software Version
mismatch!
yes PC-Card Slot [%] - Configuration Software Version mis-
match!
yes PC-Card Slot [%] – SW Update Prolib Version mismatch!
SW not loaded.
yes PC-Card slot [%] - Channel Routing Block Checksum failure!
[n] of [m] Channel Routings loaded.
yes PC-Card slot [%] - Channel Routing Block software version
mismatch!
yes PC-Card slot [%] - SW update central Module firmware
incompatibility! Software not loaded.
Flash Programming
Diag. Box Error Text (Conflict)
yes Flash: Sector is protected. AMD error code = [n]
yes Flash: Programming failure. Addr = [adr], prevData = [x],
newData = [y], AMD error code = [n]
yes Flash: Erase failure. AMD error code = [n]
yes Flash: Odd address invalid with word access
yes Flash: Memory access failed at address = [adr]
yes Flash: AMD error code = [n]
User Interface
Diag. Box Error Text (Conflict)
no Due to insufficient memory the first 10 messages have been
removed from the loglist
Automation Interface
Diag. Box Error Text (Conflict)
no Communication to Broadcast Automation lost!
no Communication to Broadcast Automation established!
Diagnostics 13-5