Appendix B Accessory Installation; Overview - High End Systems studio color User Manual

Appendix B
Accessory Installation
In this chapter you will:
install accessory dichroic glass (B-2)
install an accessory lens (B-7)
install a light snoot (B-8)

Overview

This appendix provides information on accessory installation. A list of
approved accessories is provided in the "Introduction" on page I-12.
Caution: Do not install accessories that are not specified by High End Systems. Doing
so may damage the fixture and void the warranty.
Warning: Before performing any procedure in this Appendix, adhere to the following
safety precautions:
• disconnect the unit from power
• allow the unit to cool for a minimum of 10 minutes

Appendix B Accessory Installation

B-1