Dmx Starting Channel; Setting The Starting Channel By Fixture Number - High End Systems studio color User Manual

DMX Starting Channel

Use the following subsections to set the fixture DMX starting channel. Starting
channels may be set by fixture number (1-32) or DMX channel number (1-512). Either
way, each fixture uses 16 DMX channels.

Setting the Starting Channel by Fixture Number

To set the starting channel by fixture number, complete the following procedure:
Note: to skip the homing process, simultaneously hold down the <
Note: if the <
1-12 Studio Color User's Manual
1. Apply power to the fixture.
< > buttons immediately after applying power to the fixture.
ENTER
2. Observe the display on the front of the fixture. Initially, it will display the
software version (
V
3. Press and hold the <
field. Press the <
ENTER
Figure 1.12.
Figure 1.12. Using the Front Panel
4. Using the up and down arrow keys on the front of the unit, set the desired
fixture number (
F 0 1
from the stored value.
5. Press the < > key to store the appropriate fixture number. The
ENTER
display will stop flashing.
> key is not pressed, the unit will not store the starting
ENTER
channel.
6. Press the < > button to exit the menu.
MENU
xxx) and then the fixture number (
> button until the display changes to the
MENU
> button to manipulate the address field. Refer to
to ). The display will flash when it is moved
F 3 2
> and
MENU
).
F 0 1
A d d R