Studio Color 575-S Features - High End Systems studio color User Manual

Studio Color 575-S Features

• Automatic voltage selection for electronics, lamp, and motors at 50-60 Hz for all
international voltages
• Full power factor correction
• Convection cooled for quiet operation
• Utilizes stepper motors throughout
• All functions are controllable via DMX-512 protocol
• Subtractive color mixing system plus six position fixed color wheel (100 million
color permutations)
• 6200° K color temperature using the MSR 575/2 lamp and 5600° K using the MSD
575. The color correction filter fitted in the color wheel changes the MSR 575/2's
color temperature to 3100° K and the MSD 575's color temperature to 2800° K.
Virtually infinite up/down color correction is also available through the use of the
three variable subtractive color wheels.
• Partial colors, color spins, synchronized color sequences, and random color
sequences are available for effects
• The 8° to 22° selectable beam angle may be further user shaped to variable
horizontal or vertical positioning through the use of proprietary secondary effects
lens systems.
• Variable frost
• Moving yoke achieves up to 370° pan and 240° tilt. Control accuracy is 11.6"
(sec.) (0.0032°).
• Optical encoders self-correct pan and tilt positions
• Accessory PAR type lenses are available in VNSP, NSP, WFL, MFL, and XWFL
PAR beams
• 15-segment four character alpha-numeric LED display shows data, status, and
internal diagnostic features
• LED indicators are provided to analyze power and data conditions
• Easy, quick, lamp replacement
• Integral AC power switch/breaker
• Integral floor mountable design with carrying handles. Mountable with standard
installation hardware.
• Smooth iris dimming
• Shutter providing instant blackout, strobe effects, and random strobe effects
• Flicker-free light output
• Lamp power reduction for special applications
• Automatic power-saving mode when the shutter is closed
• Remote fixture shutdown
• Enhanced lamp life
Introduction I-3