High End Systems studio color User Manual page 73

Display
Problem
Message
pan driver error
P A N D R V
E R R
pan connector is
P A N
disconnected
C O N N
pan encoder failure
P A N
E N C D
pan homing error
P A N E R R
program time has
P R G M
expired during an
T I M E
upload
sensor power error
S V C C
E R R
sensor time-out
S E N S
T O U T
Table A.1:Display Error Messages
Explanation
• motor wire shorted to
ground
• driver chip bad
• bad motor
• pan connector is dis-
connected at the logic
board or at the sensor
• external obstruction
• bad connector
• loose pinion gear
• loose motor cable
• incorrect cabling to
pan input
• bad sensor
• bad motor
• bad board
• bad board
• loose cable
• fixture attempted to
correct pan/tilt posi-
tion without success
due to a physical
obstruction
• bad sensor 1 or 2
Solution
• refer to qualified
service personnel
• refer to qualified
service personnel
• remove obstruction
• refer to qualified
service personnel
• run self-test and
refer to qualified
service personnel
• refer to qualified
service personnel
• refer to qualified
service personnel
• remove the
obstruction and
reset the fixture
• refer to qualified
service personnel
Appendix A Troubleshooting and Maintenance A-5