Common Specifications; Electrical Specifications; Environmental Resistance - Epson Stylus Photo RX700 Service Manual

Hide thumbs Also See for Stylus Photo RX700:
Table of Contents

Advertisement

EPSON Stylus Photo RX700

1.2 Common Specifications

1.2.1 Electrical Specifications

Primary power input
Table 1-10. Primary Power Input Specifications
100-120 V Model
Rated power supply voltage
100-120
(ACV)
Input voltage range (ACV)
90 ~ 132
Rated current (A)
0.8 A (max. 1.1 A)
Rated frequency (Hz)
50 ~ 60
Input frequency range (Hz)
49.5 ~ 60.5
Approx. 25 W
(Standalone copying,
ISO10561 Letter Patter,
Plain Paper–A4 Text)
Approx. 12.5 W
Power consumption (W)
(Low-power Mode)
Approx. 2.5 W (Sleep Mode)
Approx. 0.2 W
(Power Off Mode)
Note 1: This product complies with the "Energy Star" standards.
2: If the printer is not operated at all for at least 5 minutes, the standby function reduces
the current to the motor to save power.
3: If the scanner is not operated at all for at least 15 minutes, the standby function reduces
the current to the motor to save power.
Insulation resistance:
10 MΩ minimum (tested between AC line and chassis, test voltage: DC 500 V)
Dielectric strength:
AC 1000 Vrms for one minute or AC 1200 Vrms for one second
Safety Standards/EMC:
VCCI class B
Guideline for the Suppression of Harmonics in Household and General-Use
Equipment
Other Model-dependent Specifications: None.
Product Description

1.2.2 Environmental Resistance

220-240 V Model
220-240
198 ~ 240
0.4 A (max. 0.55 A)
Note "*1": When packed for shipping.
Approx. 25 W
(Standalone copying,
ISO10561 Letter Patter,
Plain Paper–A4 Text)
Approx. 12.5 W
(Low-power Mode)
Approx. 2.5 W (Sleep Mode)
Approx. 0.4 W
(Power Off Mode)
Common Specifications
Table 1-11. Environment Resistance Specifications
Item
Operation Mode
3
Temperature
10 ~ 35°C *
Humidity
20 ~ 80%, RH *
Impact
1 G, 1 x 10-3 seconds
Vibration
0.15G
"*2": No condensation
"*3": Under the following conditions
Figure 1-1. Environmental Conditions
C H E C K
For storage, make sure that the printhead is capped and ink
P O I N T
cartridges are left mounted.
Revision B
Non-operation Mode
1
-20 ~ 60°C *
1 month when at 40°C
120 hours when at 60°C
2,
3
1,
2
*
5 ~ 85%, RH *
*
1
2 G, 2 x 10-3 seconds *
1
0.50G *
14

Advertisement

Table of Contents
loading

Table of Contents