Waste Ink Pads (Lower Case) - Epson Stylus Photo RX700 Service Manual

EPSON Stylus Photo RX900

4.4.6 Waste Ink Pads (Lower Case)

C A U T I O N
Take due care not to stain any surrounding objects with waste ink.
1. Remove the Printer Mechanism. (p.107)
2. Remove the Power Supply Board. (p.109)
3. Remove the Waste Ink Cover.
4. Remove all the Waste Ink Pads.
Before installing the Waste Ink Pads, make certain that the Waste
Ink Tubes have been install in the proper locations, respectively.
Waste Ink Tube
A D J U S T M E N T On the occasion of replacing the Waste Ink Pads with new ones as
R E Q U I R E D
required by a maintenance error, replace all the specified parts
with new ones and clear the counter value.
6.1.1 Maintenance Error (p.147)
Disassembly and Assembly
Waste Ink Pads (I/C Holder)
Disassembly and Assembly of Major Parts of Printer
Waste Ink Pads (Lower Case)
Lower Case Assy
Figure 4-44. Removing the Waste Ink Pads
Revision A
Waste Ink Cover
Waste Ink Pads (I/C Holder)
110