Disassembly And Reassembly Procedure - Epson Stylus Photo RX700 Service Manual

EPSON Stylus Photo RX900

4.1.4 Disassembly and Reassembly Procedure

The flowchart below shows step-by-step disassembly procedure for Stylus Photo RX700. When disassembling each component, refer to the page number indicated for the relevant
component.
Preparation before Disassembly
Disassembly of TPU Assy
(p.101)
Disassembly of Scanner Unit
(p.96)
Printhead
(p.92)
Linear Scale
(p.91)
Disassembly and Assembly
START
(p.78)
Panel Assy
(p.80)
Scanner Unit
(p.83)
Disassembly of LCD Assy
Main Board Unit
Pressure Pump Assy
(p.86)
Middle Housing
(p.88)
Disassembly and Assembly of Major Parts of Printer
(p.102)
Flowchart 4-1. Disassembly Procedure
Stylus Photo RX700 does not have any mechanism that permits
C H E C K
P O I N T
the operator to unlock the carriage. Therefore, turn the power
ON and turn it OFF timely after seeing the movement of the
carriage to locate it at a position other than the home position.
As soon as the repaired product has been returned to the user,
there may be a case a maintenance call occurs because of the
expiration of the life of a service part. Avoid such a case, if
possible, as follows: Check the maintenance counter for
regularly replaced parts before disassembly. If the life of any
part is found almost expired, communicate with the user to that
effect. If the user's consent is obtained, replace also the relevant
service parts with new ones.
LCD Assy Disassembly of Panel Assy
(p.81)
(p.81)
(p.85)
Valve Assy (Including Ink Tube Assy)
Overview
(p.82)
(p.94)
Revision A
79