Disassembly And Assembly Of Major Parts Of Printer - Epson Stylus Photo RX700 Service Manual

EPSON Stylus Photo RX900

4.4 Disassembly and Assembly of Major Parts of Printer

The flowchart below shows step-by-step disassembly procedure for the printer. When disassembling each component, refer to the page shown in the chart below.
Waste Ink Pads (I/C Holder Assy)
PE Sensor Assy
(p.122)
Release Assy
(p.121)
Upper Paper Guides
CD-R Guide Assy
(p.123)
EJ Frame Assy
Disassembly and Assembly
I/C Holder Assy
(p.105)
(p.106)
APG Assy Ink System Assy
(p.111) (p.112)
Carriage Assy
ASF Drive Assy
(p.116) (p.113)
Paper Guide Front Assy (Platen)
(p.127)
(p.119)
Waste Ink Pads (Platen Area)
(p.120)
(p.130)
Flowchart 4-3. Removing the Major Parts of the Printer
Disassembly and Assembly of Major Parts of Printer
Removal of Exterior Parts
(p.80)
ASF Rear Assy Valve Assy (Including Ink Tube Assy)
(p.103)
Printer Mechanism
(p.107)
PF Motor Rear Paper Guide Assy
(p.125)
PF Roller Assy & PF Encoder Assy
(p.126)
Idle Roller Shaft Assy
(p.94)
CR Motor
(p.114) (p.115)
Waste Ink Pads (Lower Case)
ASF Pick Up Shaft Assy
(p.132)
(p.124)
Revision A
Power Supply Board
(p.109)
(p.110)
102