System Log - Digisol DG-BG1100U User Manual

4.6.2 System Log

Click Management > System Log, and the following page appears. The system log
dialog allows you to view the system log and configure the system log options.
Click "Configure System Log" to show the following interface. You can enable or
disable the system log and then select the log level, display level and mode, and click
"Apply" to end your configurations.
Both the log level and display level have eight choices. The default log level is
"Debugging" and the default display level is "Error".
The mode options are "Local", "Remote", and "Both". The default option is "Local".
If you select "Remote" or "Both", all events are transmitted to the specified UDP port of
the specified log server.
DG-BG1100U User Manual
74