Incoming Ip Filtering Setup - Digisol DG-BG1100U User Manual

DG-BG1100U User Manual

4.4.4.2 Incoming IP Filtering Setup

The incoming IP filter is used to block and permit IP packet transmisstion from internet.
By default incoming IP filter block all incoming packet from Internet. When incoming IP
filtering rules setup being enable on the router, you can permit remote individual PC to
access various local network service.
Choose Security > IP Filtering > Incoming and the following page appears.
By default, all incoming IP traffic from the WAN is blocked when the firewall is enabled.
However, some IP traffic can be accepted by setting up filters.
Click Add and the page for defining the IP filtering rule appears.
In this page, you can create a filter rule to identify incoming IP traffic by specifying a
new filter name and at least one condition. All specified conditions in the filter rule must
be complied with the rule to take effect. Click Save/Apply to save and activate the
filter.
You must select at least one WAN interface to apply this rule.
58