The splitter has three ports:
•
LINE: Connect to a wall phone jack (RJ-11 jack)
Modem: Connect to the Line interface of the router
•
•
PHONE: Connect to a telephone set
2. Connect the Ethernet port of the router to the network card of the PC
through an Ethernet line.
3. Plug the power adapter to the wall outlet and then connect the other
end of it to the Power port of the router.
3.2 USB Installation
To connect the DSL router to the USB port of PC, perform the following:
Connect the USB cable to the USB port on the DSL router. The cable has two
•
different connectors; you may have to try both connectors and the connector is
keyed so try different orientations.
Connect the other end of the USB cable into the USB port of PC.
•
For USB installation on Windows XP, once the PC powers up, a message appears
•
in the system tray indicating that new hardware is found.
DG-BG1100U User Manual
11