4.4.1.1 Adding a PPPoE PVC
This section describes the procedure for adding PVC 8/35 (PPPoE mode).
In the Wide Area Network (WAN) Service Setup page, click the Add button to display
the following page. In this page, you can modify VPI/VCI, service categories, and QoS.
VPI: Virtual path between two points in an ATM network. Its valid value range is
•
from 0 to 255.
VCI: Virtual channel between two points in an ATM network. Its valid value range is
•
from 32 to 65535 (1 to 31 are reserved for known protocols).
Service Category: UBR without PCR/UBR with PCR/CBR/Non Realtime
•
VBR/Realtime VBR.
Enable Quality Of Service: Enable or disable QoS.
•
In this example, PVC 8/35 is to be modified and the default values of service category
and QoS remain. In actual applications, you can modify them as required.
After proper modifications, click Next and the following page appears.
In this page, you can modify the Internet connection type and encapsulation type.
DG-BG1100U User Manual
26