Table of Contents
Advertisement
4.4 Advanced Setup
4.4.1 WAN Configuration
Choose Advance Setup > WAN, the following page appears.
To modify the parameters of existing PVC, click Edit.
•
To add an ATM PVC, click Add.
•
To delete PVC, select the Remove check box in the table and click Remove.
•
Click Save/Reboot to apply the changes and reboot the router.
•
Note: After PVC is deleted or modified, the system must be rebooted.
Otherwise, the modification does not take effect.
Click Add. The configure page displayed contains the following information:
This page is the same as the Quick Setup page. The procedure for adding PVC is
described as follows.
DG-BG1100U User Manual
25
Advertisement
Table of Contents
