Reserve Ip Address; Nat; Configuring The Dhcp Server - Digisol DG-BG1100U User Manual

Note:
If the DHCP server for the DSL Router is activated, you can configure the network
•
setting on the PC so that the option 'Obtain an IP address automatically' is set up.
If you deactivate the DHCP server, you need to assign a static IP address for the
•
PCs that use the network settings.
If the DHCP server is active, you can define a lease time. The lease time
•
determines the period for which the PCs retain the IP addresses assigned to them
without changing them.
Define the range of IP addresses that the Router should use to automatically
•
assign IP addresses to the PCs. Define the first issued IP address and the last
issued IP address.
Enable DHCP Server Relay: This function allows you to relay DHCP and BOOTP
•
requests from a subnet with no DHCP server on it to one or more DHCP servers
on other subnets.

4.4.2.4 Reserve IP Address

If you want to reserve one specific IP address for a certain PC by MAC address, edit
the reserved IP Address List.

4.4.3 NAT

Note: The NAT information is not displayed in the bridge mode.
Click Advanced Setup > NAT, and the following page appears. This part contains
Virtual Servers, Port Triggering, and DMZ Host. Choose the item to do relative
configurations.
DG-BG1100U User Manual
48