Click Save/Reboot to save your configurations. The setting for PPPoE is
Step 7
complete.
Note: After the Quick Setup is completed, you can add the new WAN
in Advanced Setup. Select Advanced Setup > WAN, the following figure appears,
you can click Add to add WAN configuration.
4.3 DSL Router Device Information
Choose Device Info, the following page appears. Choose items to view the relative
information.
4.3.1 Summary of Device information
This page contains the following information:
LAN IP Address: the management IP address.
•
Default Gateway: In the bridging mode there is no gateway. In other modes, it is
•
the address of the uplink equipment, for example, PPPoE/PPPoA.
DG-BG1100U User Manual
18
configuration