Download Print this page

Motorola DCT6200 Installation Manual: Graphics Overlaying The Video

High definition cable receiver.
Hide thumbs

Advertisement

Setting
Description
Settings
Sets the default settings for closed captions (AUTO) or the settings you have configured
(USER). Defaults to AUTO. Options are AUTO or USER.
Resets the on-screen display options to their default settings.
Restore Defaults
To exit the menu and save your settings, press the
3

Graphics Overlaying the Video

The DCT* can generate graphics that overlay the video programming or fill the entire
television screen. Common examples include on-screen menus (such as the User Setting menu),
closed captions, and interactive program guides. The DCT* overlays these graphics whenever
the subscriber opens a menu, enables closed captions, or scrolls through a program grid.
Overlaying graphics are not available on all DCT* video output and mode combinations. Table
3-1 summarizes the availability of overlaying graphics for each DCT* video output
combination:
Table 3-4
Modes supporting graphics overlay
DCT* Primary
DVI or YPrPb
Video Output
Output Mode
(DVI or YPrPb)
Graphics overlay
1080i
supported
Graphics overlay
720p
supported
Graphics overlay
480p
supported
480i
Graphics overlay
supported
The 4:3 Override feature enables you to specify a different Output Mode for high-definition
(DVI or YPrPb) programming and standard-definition (4:3) programming. If the 4:3 Override is
set to 480i and the subscriber tunes to a 4:3 standard channel, the DCT* displays graphics
overlays on all outputs even if the DVI or YPrPb Output Mode is 1080i, 720p, or 480p.
POWER
DCT* Secondary Video Output
S-Video Out
Composite Out
Video only
Video only
Video only
Video only
Video only
Video only
Graphics overlay
Graphics overlay
supported
supported
Installation
or
key.
MENU
RF Out
Video only
Video only
Video only
Graphics overlay
supported
DCT6200\DCT6208 Installation Manual
3-17

Advertisement

   Related Manuals for Motorola DCT6200

This manual also for:

Dct6208

Comments to this Manuals

Symbols: 0
Latest comments: