YPbPr Output sets the video display format for the component video outputs. Defaults to 1080i.
Options are 1080i, 720p, 480p, or 480i.
Some TVs only support certain display formats. Check the TV user manual for more
information. If you are not using an HDTV, selecting a format other than 480i causes the
on-screen display to go blank. If this occurs, view the settings on the LED panel to change the
format back to 480i.
If you are not using the DVI video connection, the DVI/YPbPr OUTPUT setting displays as
4:3 Override Sets the display format for 4:3 standard-definition programming. If the YPrPb
Output is set to 1080i, 720p, or 480p, this setting defaults to 480i. If the YPrPb Output is set to
480i, this setting defaults to OFF and cannot be changed. Options are:
OFF displays non-high-definition programs having a 4:3 aspect ratio in wide screen format.
On an HDTV, black bars display on the left and right of the picture. Selecting OFF for a 4:3
TV may result in a small picture with black bars around it.
480i displays non-high-definition programs in their original 480i format. Some TVs cannot
display 480i format on their component video inputs (YPbPr). Check the TV user manual for
more information. Graphics overlaying the video are displayed.
480p converts non-high-definition TV programs to a higher-quality 480p format. Some TVs
cannot display 480p format on their component video inputs (YPbPr). Check the TV user
manual for more information.
Graphics overlaying the video are not displayed when 4:3 OVERRIDE is set to 480p.
Displays the closed caption rendering state selected by the user:
Closed Caption rendering enabled.
Closed Caption rendering disabled.
Displays the pen size selected by the user:
Pen Size is controlled by the Closed Caption stream.
Standard Pen Size.
Large Pen Size.
Small Pen Size.
DCT6200\DCT6208 Installation Manual