Motorola DCT6200 Installation Manual: Status

High definition cable receiver.
Hide thumbs
4-28
Diagnostics

STATUS

Displays the status of each object. The status value of nnnnnnnnnnnn is replaced with the
status of the object. The information on the OSD and LED is updated every 5 seconds while the
diagnostic is displayed.
Table 4-32 lists the object status values:
Table 4-32
Object STATUS
OSD Display
Status
MEM ALLOC
Allocated
LOADING
Loading
STARTING
Enabling
ENABLED
Enabled
ENA–NOT RUN
Enabled_Not_Runnable
STOPPING
Disabling
DISABLED
Disabled
DIS-NOT RUN
Disabled_Not_Runnable
DELETING
Deleting
POSTPONED
Postponed
CONNECTED
Connect
PEND CONNECT
TryingToConnect
SEGS / TIME
Each object is displayed on the OSD and LED segments that remain for the object download in
progress. The time (in GPS seconds) is displayed on the OSD when the download is complete.
DCT6200\DCT6208 Installation Manual
Description
Memory for object has been allocated.
Object is currently being loaded.
Object is in the process of being started (the constructor is
running).
Object is running.
Object has been enabled, but it is not runnable.
Object is in the process of being stopped (the destructor is
running).
Object has been disabled.
Object has been disabled, and it is not runnable.
Object is in the process of being deleted.
Object is not runnable in the current system; will be enabled
on next boot.
Connected to download PID − awaiting data.
Trying to connect.

Advertising

   Related Manuals for Motorola DCT6200

This manual also for:

Dct6208

Comments to this Manuals

Symbols: 0
Latest comments: