Motorola DCT6200 Installation Manual: D13 Pvr Status

High definition cable receiver.
Hide thumbs

d13 PVR Status

This diagnostic indicates the status of the DVR resident in the DCT*.
Table 4-36
PVR STATUS - OSD
PVR ENABLED:
STREAM INDEXER VERSION:
CONTENT RECORD VERSION:
ENCODER #
DISK DRIVE
IDE0
PVR ENABLED
This diagnostic indicates if the DVR is enabled (TRUE) or disabled (FALSE), based on the
DCT*s configuration (connect/disconnect state) and resource availability (resource authorized;
hard disk installed and functional).
The LED displays En for enabled or Un for disabled.
STREAM INDEXER VERSION
This diagnostic indicates the stream indexer version number. The value is displayed without
leading zeros; for example, version number 0000000065 is displayed 65.
CONTENT RECORD VERSION
This diagnostic indicates the content record version number. The value is displayed without
leading zeros; for example, version number 0000000001 is displayed 1.
Encoder Information Table
The Encoder Information Table includes the encoder number, type, and record quality for each
analog encoder. The analog encoder is necessary for transmitting content to the IEEE 1394
output and to record analog content.
If the encoder is not enabled or configured, NOT AVAILABLE is displayed in the Encoder
Information Table.
ENCODER NUMBER
Currently, only one encoder is supported. The value displayed in this diagnostic is 1.
PVR STATUS
ENCODER TYPE
1
MPEG2
RECORD CAPACITY REMAINING
xxxxxxxxxxxxxxxxxxxx
Diagnostics
TRUE
131
2
RECORD QUALITY
HIGH2
DCT6200\DCT6208 Installation Manual
4-37

Advertising

   Related Manuals for Motorola DCT6200

This manual also for:

Dct6208

Comments to this Manuals

Symbols: 0
Latest comments: