Motorola DCT6200 Installation Manual page 37

3-16 Installation
The high-definition settings are:
Setting Description
TV Type Sets the aspect ratio. The LED panel displays the type you select. Defaults to 16:9.
Options are 16:9 for wide screen TVs or 4:3 LETTERBOX or 4:3 PAN/SCAN for standard
TVs:
!
4:3 LETTERBOX fits high-definition programming on the screen by placing black bars
at the top and bottom.
!
4:3 PAN/SCAN fills the screen by cropping the left and right edges of high-definition
programming.
Sets the video display format for the component video outputs. The LED panel displays the
DVI/YPbPr
format you select. Defaults to 1080i. Options are 1080i, 720p, 480p, or 480i.
Output
Some TVs only support certain display formats. Check your TV user manual for more
information. If you are not using an HDTV, selecting a format other than 480i causes the
on-screen display to go blank. If this occurs, you can view the settings on the LED panel to
change the format back to 480i.
If you are not using the DVI video connection, the DVI/YPbPr OUTPUT setting displays as
YPbPr OUTPUT.
Sets the display format for 4:3 standard-definition programming. If the YPrPb Output is set
4:3 Override
to 1080i, 720p, or 480p, this setting defaults to 480i. If the YPrPb Output is set to 480i, this
setting defaults to OFF and cannot be changed. Options are:
!
OFF displays non-high-definition programs having a 4:3 aspect ratio in wide screen
format. On an HDTV, black bars display on the left and right of the picture. Selecting
OFF for a 4:3 TV may result in a small picture with black bars around it.
!
480i displays non-high-definition programs in their original 480i format. Some TVs
cannot display 480i format on their component video inputs (YPbPr). Check the TV
user manual for more information. Graphics overlaying the video are displayed.
!
480p converts non-high-definition TV programs to a higher-quality 480p format. Some
TVs cannot display 480p format on their component video inputs (YPbPr). Check the
TV user manual for more information. Graphics overlaying the video are not
displayed.
Turns closed captions off or on. The LED panel displays the status of the closed captions.
Closed Caption
Defaults to DISABLED. Options are ENABLED or DISABLED.
Sets the font size for closed captions. Defaults to AUTO. Options are AUTO, STANDARD,
Pen Size
LARGE, or SMALL.
Sets the font style for closed captions. Defaults to AUTO. Options are AUTO, MONO
Font Style
SERIF, PROPORTION SERIF, MONO NO SERIF, PROPORTION NO SERIF, CASUAL,
CURSIVE, or SMALL.
Sets the foreground color for closed captions. Defaults to AUTO. Options are AUTO,
Foreground
WHITE, BLACK, RED, GREEN, BLUE, YELLOW, MAGENTA, or CYAN.
Color
Sets the opacity of the closed captions foreground. Defaults to AUTO. Options are AUTO,
Foreground
TRANSPARENT, TRANSLUCENT, SOLID, or FLASHING.
Opacity
Sets the background color for closed captions. Defaults to AUTO. Options are AUTO,
Background
WHITE, BLACK, RED, GREEN, BLUE, YELLOW, MAGENTA, or CYAN.
Color
Sets the background opacity for closed captions. Defaults to AUTO. Options are AUTO,
Background
TRANSPARENT, TRANSLUCENT, SOLID, or FLASHING.
Opacity
Sets the service for closed captions. Defaults to AUTO. Options are AUTO, PRIMARY
Service
LANGUAGE, SECONDARY LANGUAGE, 3, 4, 5, or 6.
Selection
DCT6200\DCT6208 Installation Manual