RF Modem STATUS
Displays CONFIGURED or NOT CONFIGURED, depending on the state of the modem.
The RF modem CENTER FREQUENCY is displayed on the OSD and LED in MHz.
REQUESTED POWER LEVEL
Displays the value assigned to the DCT* during the RF leveling process. This level is displayed
in dB or is blank if not configured.
ACTUAL POWER LEVEL
The ACTUAL POWER LEVEL is displayed on the OSD and LED in dB or is left blank if the
power level has not been set.
The REPORTBACK ADDRESS is displayed in 4-byte hexadecimal format, if configured.
LAST RB ATTEMPT TIME
Displays the last attempted reportback made by the DCT* in GPS seconds.
DCT6200\DCT6208 Installation Manual