The DCT* has a unique Triple Tuner™ architecture. One tuner is dedicated to video services,
another to the DOCSIS channel for high-speed data services, and the third tuner is used for the
out-of-band control channel.
The DCT6208 can record one live program through a single video tuner, which allows a
subscriber to record a live program while simultaneously watching a recorded program.
The front panel contains selection and tuning buttons, various displays, the power switch, and
connectors for USB, audio and video. The front panel controls provide functional navigation of
the DCT* if the remote control is lost or is temporarily out of service. Certain functions, such as
those requiring a numeric entry, require a remote control.
1 2 3
L AUDIO I N R
Table 2-1 describes the front-panel controls and LEDs.
Some connectors on the front panel are not enabled and require the support of the application
VID EO IN
L AUDIO IN R
DCT6200\DCT6208 Installation Manual
6 7 8 9
The Universal Serial Bus (USB) connector is used to support devices
such as keyboards, joysticks, scanners, disk storage, PCs, printers, and
connector accepts baseband video from a VCR, camcorder,
or other video device.
This audio input connector pair accepts audio from a VCR, camcorder, or
other audio device.
SMAR T CARD
R EMO TE
1011 12 13