Indicates if data is being carried by the OOB and EMM traffic, which is tracked separately:
DATA indicators – OSD and LED
OOB EMM DATA
The EMM indicators are on when EMM data is being carried on the OOB stream.
EMM DATA indicators – OSD and LED
OOB Signal-to-Noise Ratio (SNR)
Displays an estimate of the carrier signal-to-noise ratio in dB with an explanation:
SNR indicators - OSD
Marginal signal level, check the signal
SNR value not valid
This field is only valid when carrier lock has been established.
DCT6200\DCT6208 Installation Manual
OOB data detected within last 5 seconds
OOB data not detected within last 5 seconds
EMM data detected within last 5 seconds
EMM data not detected within last 5 seconds