Motorola DCT6200 Installation Manual: D09 Memory Configuration

High definition cable receiver.
Hide thumbs

d09 Memory Configuration

This diagnostic displays the memory configuration of the DCT*. The AppOS may supplement
the memory configuration with memory allocation per application in the future.
Table 4-33
MEMORY CONFIGURATION - OSD
MEMORY CONFIGURATION
SYSTEM RAM:
FLASH:
NVRAM:
An LED display is not available for this diagnostic. The information on the OSD is updated
upon entry to this diagnostic.
MEMORY CONFIGURATION
The amount of allocated memory for the SYSTEM RAM and FLASH are displayed in MB. The
amount of allocated memory for NVRAM is displayed in KB.
d10 Keypad - LED
This diagnostics is used to verify the functionality of the LEDs and front-panel keypad of the
DCT*.
Front-Panel Keypad Diagnostic
This diagnostic verifies the functionality of the LEDs and front-panel keypad. Each LED
segment that is lit corresponds with a front-panel key press.
The OSD displays characters in the format shown in Figure 4-10:
Figure 4-10
Character format display - OSD
<
>
A character on the OSD is highlighted when the corresponding front-panel key is depressed.
U
D
Î
M
32
MB
16
MB
256
KB
P
B
G
S
DCT6200\DCT6208 Installation Manual
Diagnostics
4-29
+
-

Advertising

   Related Manuals for Motorola DCT6200

This manual also for:

Dct6208

Comments to this Manuals

Symbols: 0
Latest comments: