D11 Interface Status - Motorola DCT6200 Installation Manual

4-30 Diagnostics

d11 Interface Status

Table 4-34 illustrates the INTERFACE STATUS diagnostic OSD display when running in base
platform or Thin Client:
Table 4-34
INTERFACE STATUS – OSD – Pages 1 and 2
INTERFACE STATUS
DOCSIS TUNER & XMITTER:
1394 I/O DEVICE:
USB I/O DEVICE:
10BT ETHERNET DEVICE:
PARALLEL PORT:
IR BLASTER:
HARD DRIVE STATUS:
SMART CARD:
DVI PORT
DEVICE CONNECTED:
REPEATER:
VIDEO XMISSION:
HDCP ENABLED:
VIDEO CONSTRAINED
OUTPUT FORMAT
ASPECT RATIO:
EDID DATA
The LED display is not available for INTERFACE STATUS diagnostics. The information on the
OSD is updated upon entry to this diagnostic selection.
DCT6200\DCT6208 Installation Manual
INST
NOT INST
NOT INST
NOT INST
NOT INST
NOT INST
NOT INST
NOT INST
YES/NO
YES/NO
ACTIVE/NOT ACTIVE
YES/NO
YES/NO
XXXX x XXXX
XX:X