Specs And General Information; Models; Features List; Hardware - Summa SUMMACUT User Manual

6.1 Models

The SummaCut series are available in different sizes and different configurations.
Depending on the region, certain sizes and or configurations may not be available. Also
branding may be different. In this section we refer to the basic model names D60, D75,
D120, D140 and D160. Where known, it is marked if a specification is configuration
depended.

6.2 Features List

6.2.1 Hardware

Integrated roll feed system with media flanges
Fully adjustable media widths. (not on the FX-Series)
Stand with basket (Optional on D60 and D75).
Back Media sensor
OPOS (Configuration depended)
With barcode recognition
OPOS 2.0 sensor on D60FXSE
OPOS X sensor automatically raised and lowered on D60R, D75R, D120R, D140R and
D160R

6.2.2 Interface

8-key control panel.
16-character liquid crystal display.
English, Spanish, French, German, Italian, Dutch, Portuguese, Polish,
Metric or English units.

6.2.3 Functionality

Four separate user configurations stored in the non-volatile memory.
Automatic media pull from roll.
Concatenation and curve smoothing to obtain better cut quality.
OptiCut drag-movement optimization.
Overcut for easy weeding.
FlexCut, Paneling, Vector Sorting.
Multiple recut feature (up to 999).
Flash EPROM's
Specifications

6 Specs and General Information

6-1