Autoload; Language; Factory Def; Menu Units - Summa SUMMACUT User Manual

SummaCut cutter

4.3.16 Autoload

The Autoload option enables the user to the change the vinyl unroll procedure. When
autoload is on, the cutter will automatically unroll the vinyl when needed. When the
autoload option is set off, the operator should manually unroll enough media before
starting to cut. When autoload is set to ask, then cutter will pause after that the pinch rollers
are put down. This gives the user the time to lower pinch roller pressure if necessary.
The default setting is ON. Tracking is not guaranteed when autoload is set to OFF.
Press , then use
to confirm or to cancel.
Autoload is default activated.
NOTE: Tracking is not guaranteed when autoload is set to OFF.

4.3.17 Language

This submenu is used to set or modify the dialogue language on the touch screen. When
the machine is new, it asks the user to choose a language. If this setting was set to the
wrong language, it can be changed with this option.
The information on the touch screen can be displayed in English, French, German, Spanish,
Italian, Polish or Dutch.
Press , then use
to cancel.
The default language is chosen when the cutter is switched on for the first time.

4.3.18 Factory Def.

This option defaults all user parameters to factory default.
4.3.19 Copy User.
This option defaults copies all the settings of User 1 to the other 3.

4.3.20 Menu Units

The setting of these options determines whether the speed and size values are displayed in
the metric measure system or ENG/US measure system.
Press , then use
confirm or to cancel.
The panel units are chosen when the cutter is switched on for the first time.
Detailed Operation
or to activate or deactivate the autoload feature. Press
or to set to the desired language. Press
or to set to the desired measure system Press
User's Manual
to confirm or
to
4-11