Log In; Log Out; To Change The Password - Oce TDS600 User Manual

Log in

The access to the key operator, repro operator, system administrator and
service operator modes is password protected to allow only authorised
personnel to use particular functions.
The default password for the System Administrator is: SysAdm.
The default password for the Key Operator is: KeyOp.
The default password for the Repro Operator is: ReproOp.
The default passwords are case sensitive. Change the passwords after
Note:
your first log in.
How to log in
From the 'File' menu, select 'Log in'.
1
Select the correct user name.
2
Enter the Password.
3
Click 'OK'.
4
You must log in into each application separately.
Note:

Log out

You have to log out to leave the key operator, repro operator and system
administrator modes.
How to log out
From the 'File' menu, select 'Log out'.
1
You return to anonymous user mode.
You must log out into each application separately.
Note:

To change the password

You can change your password on a standard base. You can change the
password for each user mode (except anonymous user mode, for which no
password is required and service operator) by taking the following steps:
Change the password:
From the 'File' menu, select 'Log in'.
1
Click the 'Password' button.
2
118 Océ TDS600 Multifunctional Digital System User Manual