Oce TDS600 User Manual page 224

TCP/IP
Setting
Domain
DNS
Enable
Enable DHCP
IP address
IP mask
Default gateway
Primary WINS
server
Secondary WINS
server
IPX/SPX
Setting
Enable
NetBeui
Setting
Enable
224 Océ TDS600 Multifunctional Digital System User Manual
Description
To specify the network domain name. The network domain
name is the TCP/IP address of the domain server where the
Océ TDS600 controller is connected to.
To specify the DNS server. Use semicolons ( ; ) to separate
entries.
To define if the TCP/IP adapter is enabled or disabled, in or-
der to allow TCP/IP communication.
To enable or disable the DHCP protocol, that lets network ad-
ministrators manage centrally and automate the assignment
of Internet Protocol. In order to make DHCP recognise your
system, a fixed IP address has to be configured.
To specify the IP address for the server. A single adapter card
can have more than one adapter on it, so it is possible to spec-
ify several IP addresses.
To specify the IP subnet mask for the server. The subnet mask
is a number that when compared by the computer with a net-
work address number, will block out all but the necessary in-
formation.
To specify the IP address of the default gateway. A gateway
connects networks using different protocols so that informa-
tion can be passed from one to the other. A gateway both
transfers information and converts it to a form compatible
with the protocols used by the receiving network.
Type the IP address for the primary WINS server. This uses
Windows Internet Name Service (WINS) protocol in combi-
nation with name query broadcasts to resolve computer
names to IP addresses.
Type the IP address for the secondary WINS server. This uses
Windows Internet Name Service (WINS) protocol in combi-
nation with name query broadcasts to resolve computer
names to IP addresses.
Description
To define if the SPX adapter is enabled or disabled.
Description
To define if the NetBeui adapter is enabled or disabled.