Load Rolls Of Copy Material - Oce TDS600 User Manual

Load rolls of copy material

When a roll is empty during a print job, a 'Roll empty' message is displayed
at the printer operating panel and on the System Control Panel application. You
then have to load a new roll of print material.
Currently the following media are supported on the Océ TDS600:
Note:
Plain paper (Red label plus) 75g/m
Plain paper (Red label) 110g/m
Transparent paper 90-95g/m
Polyester film (CPRF) 3.5mil
Polyester film 4.5mil
vellum (9020/9022) 20lbs.
Caution:
placing rolls of print material in the printer.
Load paper
Open the appropriate roll compartment (see figure 126).
1
[126] Opening the appropriate roll compartment
If necessary remove any scrap material from the paper roll compartment.
2
Remove the roll holder from the paper roll compartment.
3
Media and supplies
See Appendix B for more information about safely handling/
2
2
2
241