Oce TDS600 User Manual page 237

Output media text
source
Output fold text
method
Output binding text
method
Output media text
destination
Output file type text
Output file com- text
pression
Output file size num
Output file desti- text
nation
Output resolu- num
tion (width di-
rection)
Output resolu- num
tion (height di-
rection)
Océ Power Logic: Account logging
Source from which the output media was taken in
case of physical output: ROLL1, ROLL2, ROLL3,
ROLL4, ROLL5, ROLL6, TRAY1, TRAY2,
TRAY3. MANUAL (manual feed slot). Empty if
no physical output.
Folding method applied to the output media in
case of physical output:
For folding in 2 directions: AFNOR, ERICSSON,
DIN.
For folding in 1 direction: AFNOR1,
ERICSSON1, DIN1.
Empty if no physical output or not folded.
Specifies the binding method for the output me-
dia. EDGEONLY (only binding edge), REIN-
FORCE. Empty if no physical output or no
binding method.
Output media destination in case of physical out-
put: BELT1, BELT2, BELTS, CDT, IRT, FIRST-
FOLD, STACKER.
Empty if no physical output.
Type of output file in case of digital output: TIFF,
CALS, PDF. Empty if no digital output.
Compression method of output file in case of dig-
ital output: GROUP3, GROUP4, PACKBITS,
LZW. Empty if no digital output or no compres-
sion.
9 Size of output file in bytes (including all pages in
case of multi-page output files) in case of digital
output. Empty if no digital output.
255 Nickname of the destination for the output file as
used in the scan manager, in case of digital output.
If multiple pages in one job have the same desti-
nation file, a multi-page file is generated. Empty if
no digital output.
4 Resolution of output in width direction in dpi
4 Resolution of output in height direction in dpi
237