Change The Operator Panel Language; Settings On The Océ Tds600 Copier Operator Panel - Oce TDS600 User Manual

[29] 'File' section of the Océ TDS600 Copier

Change the operator panel language

It is possible to change the operator panel language. You can choose between
two preferred languages.
To select a language
Open the 'Scanner' card in the 'Original' section.
1
Press the 'Language' function button to set the needed language.
Settings on the Océ TDS600 Copier operator panel
On start-up of the Océ TDS600 Copier, the 'Custom' card is displayed (see
figure 30).
The custom card
Editor. This contains a number of settings which are direct accessible. The key
operator defines the custom card in the Océ Settings Editor.
[30] The 'Custom ' card on the scanner operator panel
64 Océ TDS600 Multifunctional Digital System User Manual
gives access to the settings you defined in the Océ Settings