Isdn Co Line Attributes - LG-Nortel iPECS-50 Administrator And Maintenance Manual

Table of Contents

Advertisement

IPECS
Release 5
Admin & Maintenance
Button
ATTRIBUTE/DISPLAY
5
001-002 TYPE 7_8(0-5)
UNKNOWN (0)
6
001-002 TYPE FOR 10_11
UNKNOWN (0)
2.3.5.8 ISDN CO Line Attributes -PGM Code 151-
ISDN standards require that the ISDN terminating device, in this case the iPECS system, include
various "adjustable" timers and counters as described below.
PROCEDURE:
COL ISDN ATT
ENTER CO RANGE
01-02 COL ISDN ATT
PRESS FLEX KEY (01-16)
See Table 2.3.5.8-1
DISPLAY
Table 2.3.5.8-1 ISDN CO LINE ATTRIBUTES (PGM 151)
Button
ATTRIBUTE/DISPLAY
1
001-002 T200 (1- 5 )
(1-5) : 1 (sec)
2
001-002 T201 (1- 5 )
(1-5) : 1 (sec)
3
001-002 T202(1-5 )
(1-5) : 2 (sec)
DESCRIPTION
ISDN CALLED NO is made with the
International format, National format,
Network format, Subscriber format, or
Abbreviated format when user dials less
than 10 digits.
ISDN CALLED NO is constructed with the
International format, National format,
Network format, Subscriber format, or
Abbreviated format when user the dials
more than 10 digits.
1.
Press the [PGM] button and dial 151.
2.
Use the dial-pad to enter a CO Line range. For a single CO Line, enter the
same number twice. For the iPECS-50 and MFIM100 the acceptable range is
01~42, for the MFIM300 the acceptable range is 001~200 and for the
MFIM600 the range is 001~400.
3.
Press the desired Flex button, refer to Table 2.3.5.8-1.
4.
Use the dial-pad to enter desired data for the Attribute, refer to Table
2.3.5.8-1.
5.
Press the [SAVE] button to store the data entry.
DESCRIPTION
The terminal must support one T200 timer
for each data link supported.
The minimum time between TEI ID check
messages.
When the terminal transmits a TEI Identify
Request message, it must provide one
T202 timer for each logical link supported.
2-53
Issue 5.0
RANGE
DEFAULT
0: Unknown
0
1: International
2: National
3.Network
4: Subscriber
5: Abbreviated
0: Unknown
0
1: International
2: National
3.Network
4: Subscriber
5: Abbreviated
RANGE
DEFAULT
1~5
1
(seconds)
1~5
1
(seconds)
1~5
2
(seconds)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfim300Mfim100Mfim600

Table of Contents